Extruded polystyrene · 150–700 kPa
XPS Foam Insulation Board
XPS (extruded polystyrene) foam board has a thermal conductivity of about 0.028–0.030 W/(m·K), roughly R-5 per inch, compressive strength of 150–700 kPa and water absorption under 1% by volume, which makes it the standard insulation under freezer room floors.
λ ≤ 0.030 W/(m·K) · R-5 per inch
λ ≤ 0.030 W/(m·K) · R-5 per inchSpecifications
Typical models.
Closed-cell extruded polystyrene boards for freezer floors, foundations, inverted roofs and walls. High compressive strength and very low water uptake, in blue, pink or custom colours. Values are typical; we configure voltage, size or capacity and confirm data on the quotation.
| Grade | Compressive strength | Thickness | Thermal conductivity λ | Edge | Board size |
|---|---|---|---|---|---|
| XPS 150 | ≥ 150 kPa | 20–100 mm | ≤ 0.030 W/(m·K) | Straight or shiplap | 1200 × 600 mm |
| XPS 250 | ≥ 250 kPa | 30–100 mm | ≤ 0.030 W/(m·K) | Shiplap | 1200 × 600 / 2440 × 600 mm |
| XPS 350 | ≥ 350 kPa | 40–100 mm | ≤ 0.029 W/(m·K) | Shiplap or tongue & groove | 1200 × 600 mm |
| XPS 500–700 | 500–700 kPa | 50–100 mm | ≤ 0.029 W/(m·K) | Shiplap | 1200 × 600 mm |
≈ approximate, measured at standard test conditions.
Features
Built for daily commercial use.
Built for load
Grades from 150 to 700 kPa carry floor slabs, forklift traffic and parking decks.
Moisture resistant
The closed-cell structure keeps water absorption below 1% by volume, so insulation value holds in wet ground.
Freezer floors
Standard insulation layer under freezer room slabs, combined with a vapour barrier and heating mat.
Colour and print
Blue, pink, yellow or your colour, with your brand printed on the board.
Applications
Where it works.
- Freezer and cold room floors
- Foundations and basement walls
- Inverted and green roofs
- Under-slab insulation
- Cavity walls
- Road and rail frost protection
What is XPS insulation?
XPS or EPS under a slab?
What R-value is 2-inch XPS?
Why is XPS blue or pink?
Related
More from this line.
Request a quote